Neighbor Send-Community; Neighbor Shutdown - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
NEIGHBOR SEND
neighbor {<ip-address>|<peer-group-name>} send-community
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command specifies that community attribute should be sent to a BGP neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
No community attribute is sent to any neighbor.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.1 send-community

NEIGHBOR SHUTDOWN

neighbor {<ip-address>|<peer-group-name>} shutdown
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command administratively shuts down a neighbor or peer group.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
None.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 shutdown
432
Beta
-
COMMUNITY
Neighbor's IP address.
Name of a BGP peer group.
Neighbor's IP address.
Name of a BGP peer group.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta