Ip Dhcp Option Routers - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

IP DHCP OPTION ROUTERS

ip dhcp option routers <ip-address> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the router in the subnet for which the DHCP is configured.
P
ARAMETERS
ip-address
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip dhcp option routers 1.1.1.1
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
ip dhcp option routers
Description
IP address of the router.
If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.
Beta
823