Show Ip-Policy - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
SHOW IP POLICY
show ip-policy [<name>]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command is used to view all the IP policies configured in the system. This
command also displays interfaces on which these policies are applied.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# show ip-policy
!
! IP-Policy configuration
!
ip-policy pbr1
10 match any m1 m2 interface GigabitEthernet3/0 next-hop
1.2.2.1
exit
!
interface GigabitEthernet3/1
ip-policy pbr1
exit
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Displays the details of a specific IP
policy.
Beta

show ip-policy

539