Neighbor Ebgp-Multihop; Neighbor Filter-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
NEIGHBOR EBGP
neighbor {<ip-address>|<peer-group-name>} ebgp-multihop [<1-
255>]
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command can be
used to accept and attempt BGP connections to external peers residing on
networks that are not directly connected.
P
ARAMETERS
Parameter
ip-address
peer-group-name
1-255
D
EFAULT
Only directly connected external neighbors are allowed.
E
XAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 ebgp-multihop
4
NEIGHBOR FILTER
neighbor {<ip-address>|<peer-group-name>} filter-list <1-199>
{in|out}
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command uses AS-
PATH access list to filter the updates from a specified neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
1-199
in
out
424
Beta
-
MULTIHOP
IP address of the BGP-speaking neighbor.
Name of a BGP peer group.
The maximum hop count to reach neighbor.
-
LIST
Neighbor's IP address.
Name of a BGP peer group.
Number of an AS path access list. You can define this
access list with the ip as-path access-list command.
Access list to incoming routes.
Access list to outgoing routes.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta