Neighbor Next-Hop-Self; Neighbor Peer-Group (Adding Members) - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NEIGHBOR NEXT
neighbor {<ip-address>|<peer-group-name>} next-hop-self
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command disables
the next hop calculation for the specified BGP-speaking neighbor or peer group.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
Disabled.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 next-hop-self
NEIGHBOR PEER
neighbor <ip-address> peer-group <peer-group-name>
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command is used to add BGP neighbors to a peer group.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
There are no BGP neighbors in a peer group.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 peer-group P1
OmniAccess 700 CLI Command Reference Guide
Beta
- -
HOP SELF
IP address of the BGP neighbor who belongs to the peer
group specified by the tag.
Name of a BGP peer group to which the neighbor belongs.
- (
GROUP ADDING MEMBERS
IP address of the BGP neighbor.
Name of a BGP peer group.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
)
Description

neighbor next-hop-self

427
Beta