-
NO LOG
ADJACENCY
no log-adjacency-changes
The "no" command enables sending of hello packets and routing updates on a
specified interface.
NO AREA AUTHENTICATION
no area {<0-4294967295>|<ip-address>} authentication [message-
digest]
The "no" command disables authentication for an OSPF area.
NO AREA DEFAULT
no area {<0-4294967295>|<ip-address>} default-cost <0-
16777215>
The "no" command removes the specific cost assigned to the default summary
route used for the stub area/NSSA.
NO AREA NSSA
no area {<0-4294967295>|<ip-address>} nssa [default-
information-originate] [no-summary] [no-redistribution]
The "no" command sets area to default.
NO AREA RANGE
no area {<0-4294967295>|<ip-address>} range {<ip-address
subnet-mask|<ip-address/prefix-length>}[not-advertise]
The "no" command removes the address range for which a single route is to be
advertised.
NO AREA STUB
no area {<0-4294967295>|<ip-address>} stub [no-summary]
The "no" command sets area to default.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
CHANGES
-
COST
Alcatel-Lucent
no log-adjacency-changes
477
Beta