Show Ip Nat Statistics <Interface-Name - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Network Address Translation
SHOW IP NAT STATISTICS
show ip nat statistics <interface-name> {in|out|both}
D
ESCRIPTION
This command displays NAT statistics for a specific interface.
P
ARAMETERS
Parameter
interface-name
in
out
both
E
XAMPLE
The following example shows NAT statistics on a specified interface:
ALU# show ip nat statistics GigabitEthernet7/0 Out
ip nat n1
Dropped: 0, Bypassed: 0, Enqueued: 0
10 match any m1 source-nat host 1.1.1.1
NATted Packets: 0
20 match any m2 source-nat host 1.1.1.2
NATted Packets: 0
interface GigabitEthernet7/0 out
588
Beta
< -
INTERFACE NAME
Name of the interface.
"in" means ingress traffic.
"out" denotes that egress traffic.
Implies both ingress and egress traffic.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
>
Description
Beta