Destination-Nat Static - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
DESTINATION NAT STATIC
[<1-65535>] match [{all|any}] <match-list name> destination-nat
pool <list-name> static
D
ESCRIPTION
This command is used to configure a static DNAT that uses one-to-one address
mapping without port translation.
P
ARAMETERS
Parameter
1-65535
match
[{all|any}]
<match-list
name>
destination-nat
list-name
static
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-nat-N2)# match m1 destination-nat pool l1 static
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
The range for the NAT policy rule. This rule number signifies
the priority of a rule.
This command forms a match-list of the Common
Classifiers that are pre-configured. In this type of match, the
relevant action is performed even if one rule in the list is
satisfied.
Type of NAT, here it is the DNAT.
The name of the list.
Use this keyword to configure static DNAT.
Alcatel-Lucent

destination-nat static

Description
Beta
579