Ssh - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Routing and Forwarding

SSH

ssh [vrf <vrf-name>] {<ip-address>|<hostname>} <user-name>
[version {1|2}]
D
ESCRIPTION
SSH command is used for logging into a remote system specified by the address.
P
ARAMETERS
vrf-name
ip address
hostname
user-name
version {1|2}
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ssh vrf ALU-vrf 10.91.0.25
R H
ELEASE ISTORY
Release 2.3: parameter vrf <vrf-name> was added.
566
Beta
Parameter
Alcatel-Lucent
Description
Name of the VRF. If the VRF name is
specified, the packets will be routed
using the routing table of the specified
VRF on a interface associated with the
VRF.
IP Address of the remote system.
Host name of the remote system.
The login/user name to be used.
SSH version number - version 1 or
version 2.
OmniAccess 700 CLI Command Reference Guide
Beta