Ip Access-List Standard - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
IP ACCESS LIST STANDARD
ip access-list standard {<1-99>|<1300-1999>|<access-list-name>}
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to define a
named access list, and enters Standard Access-list Configuration mode.
P
ARAMETERS
Parameter
<1-99>|<1300-
1999>
access-list-name Name of the access list.
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# ip access-list standard test
ALU(config-std-nacl)#
Configure Standard IP Access-list Rule
This command is used to configure a rule for a Standard IP Access-List. You can
configure multiple rules for an IP access list.
{permit|deny} {any|host <host-ip-address>|<ip-address/
prefix-length>|<ip-address subnet-mask>}[log]
Parameter
permit
deny
host <host-ip-
address>
<ip-address/prefix-
length>|<ip-address
subnet-mask>
log
Example:
ALU(config-std-nacl)# permit host 10.0.0.1
ALU(config-std-nacl)# permit 11.0.0.0/8
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
IP access list number.
Result is permit if conditions are matched.
Result is deny if conditions are matched.
Specify host IP address.
Source IP address network.
If access list is matched, log the message.
Alcatel-Lucent

ip access-list standard

Description
Description
Beta
345