Show Crypto - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW CRYPTO

show crypto
D
ESCRIPTION
This command displays all the configuration details related to IPsec including the
default configurations.
P
ARAMETER
None.
E
XAMPLE
ALU(config)# show crypto
crypto ike identity exampleIdentity
peer-id user-fqdn fred@flintstones.com
my-id fqdn @flintstones.com
my-cert cert_flintstones
crypto ike key topSecret peer 100.1.200.4
crypto ike key anotherTopSecret peer 126.2.34.68
crypto ike dpd interval 15 timeout 60
!crypto ike policy default
! proposal sha1-aes128
! ipsec security-association lifetime seconds 28800
! lifetime seconds 86400
! pfs group2
crypto ike policy examplePolicy
proposal sha1-aes256
ipsec security-association lifetime seconds 28800
lifetime seconds 7200
pfs group5
authentication pre-shared
! Policy in Use (by 1 cryptomap/s)
!crypto ipsec transform-set default
! esp-sha1-aes256 esp-sha1-3des esp-md5-aes256 esp-md5-3des
crypto ipsec transform-set exampleT-set esp-sha1-aes192 esp-md5-aes192
! Transform-Set in Use (by 1 cryptomap/s) crypto map exampleMap ipsec-
ike examplePolicy
peer 100.1.200.4
match exampleMatchList
transform-set exampleT-set
pfs group5
lifetime seconds 3600
lifetime kilobytes 4096
! Applied to : GigabitEthernet3/1
interface GigabitEthernet3/1
crypto map exampleMap
!crypto ipsec profile default
! ike-policy default
! transform-set default
! pfs group2
! lifetime seconds 28800
! Not Applied to Any Interface
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
show crypto
679
Beta