Interface Switchport; No Duplex; No Shutdown; No Speed - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

INTERFACE SWITCHPORT

interface switchport <slot/port>
D
ESCRIPTION
This command is used to configure an L2 interface.
P
ARAMETERS
slot/port
E
XAMPLE
ALU(config)# interface switchport 1/0
ALU(config-if switchport1/0)#

NO DUPLEX

no duplex
This command restores the default duplex operation. The default duplex mode is
auto.

NO SHUTDOWN

no shutdown
This command is used to administratively bring up the interface.

NO SPEED

no speed
This command is entered in the Interface Configuration mode. This command
resets the interface speed to its default value, which is 1000.

NO SWITCHPORT ACCESS VLAN

no switchport access vlan
This command deletes the access VLAN-ID configured on the port. This makes it
to switch over to the pure bridging mode.

NO SWITCHPORT HYBRID NATIVE VLAN

no switchport hybrid native vlan <2-4094>
This command deletes the native VLAN configured on the interface, and resets it
to its default. The default hybrid native VLAN ID is 1.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
The slot and port numbers of the
interface.
Beta
interface switchport
163