Show Ip Filter Statistics - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

The following syntax displays the filter f1's details.
ALU(config-filter-f1)# show ip filter f1
ip filter f1
10 match any m1 permit
20 match any m1 permit
default deny
interface GigabitEthernet7/0 In, Stats Off

SHOW IP FILTER STATISTICS

show ip filter statistics [<interface-name> {in|out|both}
|<filter-name>]
D
ESCRIPTION
Enter this command in the Super User mode. This command displays the
statistics of a filter on a particular interface.
P
ARAMETERS
interface-name
in
out
both
filter-name
E
XAMPLE
The following command displays the filter statistics:
ALU(config)# show ip filter statistics GigabitEthernet 7/0
in
ip filter f1
20 match any m1 permit
10 match any m1 permit
default deny
interface GigabitEthernet7/0 In, Stats On
ip filter f2
20 match any m2 deny
default deny
interface GigabitEthernet7/0 In, Stats Off
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
The name of the interface.
The "in" keyword implies ingress
statistics.
The "out" keyword implies egress
statistics.
Both ingress and egress statistics.
Name of the filter.
Hits 0
Hits 2
Hits 0
Hits 0
show ip filter statistics
597
Beta