Card Type - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

CARD TYPE

card type {E1|T1} <slot>
D
ESCRIPTION
This command is entered in the Configuration mode to set the card type of T1
controller in a specific slot.
P
ARAMETERS
E1|T1
slot
D V
EFAULT ALUE
By default, no card type is installed.
E
XAMPLE
The following example sets the card type of T1 controller:
OA(config)# card type T1 0
Note: The line card is not functional until card type is set. Reboot/Reload the chassis to
change the card type, which will remove the previous configuration. Use controller
and channel-group commands to relaod the card type.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Sets the card type to E1 or T1.
Use T1 keyword to set the card type
to T1.
Enter the specified slot number.
Beta
card type
223