Transparent-Forward <Name; Pass-Through Protocol - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
TRANSPARENT FORWARD
transparent-forward <name>
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure a TF policy.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# transparent-forward TF1
ALU(config-transparent-forward-TF1)#
-
PASS THROUGH PROTOCOL
pass-through protocol {<1-65535>|appletalk|ipx|nonip}
D
ESCRIPTION
Enter this command in the TF-Configuration mode.
This command is used to define how the non-IP packets should be treated in a TF
configuration. Using this command, other protocols like IPX, Apple-talk can be
configured to be bridged across the transparent firewalling interfaces.
Using this command more than once will add the protocol to existing configured
protocols. By default, IP and ARP protocols are configured as passthrough
protocols.
P
ARAMETERS
1-65535
appletalk|ipx|nonip
E
XAMPLE
ALU(config-transparent-forward-TF1)# pass-through protocol
nonip
OmniAccess 700 CLI Command Reference Guide
Beta
< >
NAME
Parameter
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
transparent-forward <name>
Description
Name for the TF policy being configured.
Description
Protocol number.
Protocol type.
735
Beta