Distribute-List - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
DISTRIBUTE LIST
distribute-list {<1- 99>|<1300-2699>|gateway <ip-prefix-list
name>|prefix <ip-prefix-list name>} {in|out} [<interface-name>]
D
ESCRIPTION
Enter the command in the Router Configuration mode. This command suppresses
networks from being advertised in routing updates.
•
The distribute-list in command is used to filter networks in received routing
updates.
•
The distribute-list out command suppresses networks from being advertised in
updates.
P
ARAMETERS
Parameter
1-99
1300-2699
gateway <ip-
prefix-list name>
prefix <ip-
prefix-list name>
in
out
interface-name
D V
EFAULT ALUE
Disabled
E
XAMPLE
ALU(config-router rip)# distribute-list prefix prefix-example
in GigabitEthernet 7/0
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
IP access list number.
IP expanded access list number.
Name of the prefix list to be applied to the gateway of the
prefix being updated.
Name of a prefix list. This list defines which networks are
to be received and which are to be suppressed in routing
updates, based upon matching the network prefix to the
prefixes in the list.
Filter incoming routing updates.
Filter outgoing routing updates.
Interface on which the access list should be applied. If no
interface is specified, the access list will be applied to all
updates.
Alcatel-Lucent

distribute-list

381
Beta