Dot1X Timeout Supp-Timeout; Dot1X Timeout Tx-Period - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

1
DOT X TIMEOUT SUPP
dot1x timeout supp-timeout <1-65535>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the switch-to-client retransmission time for the EAP-request frame.
P
ARAMETERS
1-65535
D V
EFAULT ALUE
The default is 30 seconds.
E
XAMPLE
ALU(config-if switchport5/0)# dot1x timeout supp-timeout 40
1
DOT X TIMEOUT TX
dot1x timeout tx-period <1-3600>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
sets the number of seconds that the OA-700 waits for a response to an EAP-
request/identity frame from the client before retransmitting the request.
P
ARAMETERS
1-3600
D V
EFAULT ALUE
The default is 30 seconds.
E
XAMPLE
ALU(config-if switchport5/0)# dot1x timeout tx-period 60
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
TIMEOUT
Parameter
-
PERIOD
Parameter
Alcatel-Lucent

dot1x timeout supp-timeout

Description
Indicates the switch-to-client
retransmission time for the EAP-request
frame.
Description
Indicates the number of seconds that the
OA-700 waits for a response to an EAP-
request/identity frame from the client.
Beta
195