Show Transparent-Forward - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW TRANSPARENT
show transparent-forward [<name>]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command is used to view all the TF policies configured in the system. If a TF
policy is specified then the details of the specific TF policy is displayed. This
command also displays the interfaces on which these policies are applied.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# show transparent-forward
!
! Transparent-forward configuration
!
interface GigabitEthernet7/1
transparent-forward interface GigabitEthernet7/0
exit
!
transparent-forward tf
pass-through protocol ipx
exit
!
interface GigabitEthernet7/0
transparent-forward tf interface GigabitEthernet7/1
exit
!
ALU(config)#
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
FORWARD
Parameter
Alcatel-Lucent

show transparent-forward

Description
Displays the details of a specific TF
policy.
Beta
737