Ip Dhcp Option Bootfile-Name - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

IP DHCP OPTION BOOTFILE
ip dhcp option bootfile-name <file-name> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the boot file for a host.
P
ARAMETERS
file-name
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# ip dhcp option bootfile-name boot_image
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
NAME
Parameter
Alcatel-Lucent

ip dhcp option bootfile-name

Description
Name of the Boot file for a host.
If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.
Beta
817