Show Firewall Alg Noe Subaddress-Mapping - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Filter and Firewall
SHOW FIREWALL ALG NOE SUBADDRESS
show firewall alg noe subaddress-mapping [<phone-ip-address>
|<phone-mac-address>]
D
ESCRIPTION
This command is used to view the NOE sub address mapping. You can specify
the IP address or the MAC address to view sub address mapping for a specific
NOE phone.
P
ARAMETERS
phone-ip-address
phone-mac-address
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show firewall alg noe subaddress-mapping
Mac Address
0080.9f6b.f8be
0080.9f69.2f0b
Note: The IP addresses displayed in the output are LAN addresses and not WAN IP
address.
There is no guarantee of giving sequential sub address to phones and this command
will not show any output if NAT is not enabled on the OA-700.
R H
ELEASE ISTORY
Release 2.3: command was introduced.
650
Beta
Parameter
Phone IP Address
1.1.1.3
1.1.1.2
Alcatel-Lucent
-
MAPPING
Description
IP address configured for the NOE
phone.
MAC address configured for the NOE
phone.
Nat IP Address Sub Address
135.254.162.29
135.254.162.29
OmniAccess 700 CLI Command Reference Guide
Beta
01
00