Dot1X Port-Control; Dot1X Reauthentication - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
802.1X Port-Based Authentication
1 -
DOT X PORT CONTROL
dot1x port-control [auto|forced-authorized|forced-unauthorized]
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to enable 802.1X port-based authentication on the L2 interface.
P
ARAMETERS
auto
forced-authorized
forced-unauthorized
D V
EFAULT ALUE
The default authentication is forced-authorized.
E
XAMPLE
ALU(config-if switchport5/0)# dot1x port-control auto
1
DOT X REAUTHENTICATION

dot1x reauthentication

D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to enable periodic reauthentication of the client.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, this is disabled.
E
XAMPLE
ALU(config)# dot1x system-auth-control
192
Beta
Parameter
Alcatel-Lucent
Description
Network access is granted only on
authorization.
Network access is granted without
authorization.
Port is disabled for data transfer.
OmniAccess 700 CLI Command Reference Guide
Beta