Telephony-Identity Address - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
TELEPHONY IDENTITY ADDRESS
telephony-identity address <client-ip-address> name <client-
user-name> [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the Telephony Service Mode. This command is used to
configure the IP address and name of a telephony client.
P
ARAMETERS
client-ip-address
client-user-name
vrf-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(telephony-service)# telephony-identity address 3.3.3.50
name 2000
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
IP address of the telephony client.
Note: The telephony client IP address
should exist within the local
network.
Name of the telephony client.
Note: The telephony client name can
be a maximum of 8 characters.
Name of the VRF.
Note: Configuring VRF is mandatory
if the WAN link is associated to
a VRF.

telephony-identity address

771
Beta