Peer-Id; Pfs - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
PEER ID
peer-id {dn|fqdn|user-fqdn} <name>|address <ip-address>
D
ESCRIPTION
This command configures an ID for the peer.
P
ARAMETER
name
ip-address
E
XAMPLE
ALU(ike-identity-exampleidentity)# peer-id user-fqdn
selma_bouvier@alu.com

PFS

pfs [group1|group2|group5]
D
ESCRIPTION
This command is entered in the IKE Policy mode. This command is used to
configure a PFS group.
Note: If the PFS group is not explicitly configured, group2 is used as the default PFS.
P
ARAMETER
group1|group2|group5
D V
EFAULT ALUE
If the PFS group is not explicitly configured, the default group2 is used.
E
XAMPLE
ALU(config-crypto-ike-policy-P1)# pfs group1
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
parameter
Parameter
Alcatel-Lucent
Description
Name of the peer certificate imported
previously.
IP address of the peer.
Description
Name of the PFS group.
Beta

peer-id

677