Distance Ospf - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

DISTANCE OSPF

distance ospf {external|inter-area|intra-area} <1-255>}}
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command performs
the same function as the distance command used with an access list. However,
the distance OSPF command allows you to set a distance for an entire group of
routes, rather than a specific route that matches an access-list.
P
ARAMETERS
Parameter
external
inter-area
intra-area
1-255
D V
EFAULT ALUE
Default administrative distance for all OSPF routes is 110.
E
XAMPLE
ALU(config-router ospf 1)# distance ospf external 10
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Distance for external routes.
Distance for inter-area routes.
Distance for intra-area routes.
Administrative distance.
Alcatel-Lucent
Description
Beta
distance ospf
341