Table of Contents
Advertisement
NO SHUTDOWN
no shutdown
D
ESCRIPTION
This command is entered in the interface configuration mode to administratively
bring up the interface.
P
ARAMETERS
None.
E
XAMPLE
ALU(config)#interface Serial 0/0
ALU(config-if Serial0/0)# shutdown
SHOW INTERFACE
show interfaces Serial [<slot/port>]
D
ESCRIPTION
Displays the configuration details of the specified serial interface.
P
ARAMETERS
slot/port
E
XAMPLE
ALU# show interfaces Serial 0/0
Serial0/0 is up, line protocol is up
X.21 DTE Serial attached
Internet address is 15.0.0.1/8
MTU 1500 bytes, BW 2048 Kbit, DLY 0 usec,
reliability 0/255, txload 0/255, rxload 0/255
loopback not set
Encapsulation hdlc, keepalive set (10 sec)
Last input never, output never, output hang never
Last claring of "show interface" counters never
Queueing strategy: fifo
Output queue: 0 0 (size/max) 0 drops:Input queue 0/0 (size/max) 0 drops
Conversations: 0/0/0 (active/max active/max total)
Reserved Conversations: 0/0 (allocated/max allocated)
Available Bandwidth 2048 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
12105 packets input, 167342 bytes, 0 no buffer
0 Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Slot and port number of the serial
interface.
Beta
no shutdown
241
Advertisement
Table of Contents
