Class - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Quality of Service

CLASS

class {<class-map name>|<class-default>}
D
ESCRIPTION
This command is used to configure a traffic class, i.e., associate a class map. Use
keyword class-default to configure the default traffic class to the policy map.
This command enters the Class sub-configuration mode inside the Policy-map
mode.
Note: If no rule is associated with a class-map and if you try to configure a class on that
class-map, a warning is displayed.
Example:
ALU (config-qos-P1)# class C1
No rule in class-map C1. It will not match any traffic.
remove this..
P
ARAMETERS
class-map name
class-default
D V
EFAULT ALUE
'class-default' is the default traffic class.
E
XAMPLE
ALU(config-qos-P1)# class C1
ALU(config-qos-P1-C1)#
ALU(config-qos-P1-C1)# class class-default
ALU(config-qos-P1-class-default)#
780
Beta
Parameter
Alcatel-Lucent
Description
Name of the class map.
Default traffic class.
OmniAccess 700 CLI Command Reference Guide
Beta