Mlfr Bid; Mlfr Hello Interval - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

MLFR BID

mlfr bid <name>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
assigns a bundle identification (BID) name to the bundle interface.
P
ARAMETERS
name
E
XAMPLE
ALU(config-if mlfr100)# mlfr bid alu1

MLFR HELLO INTERVAL

mlfr hello-interval <1-180>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
configures the hello interval.
P
ARAMETERS
1-180
D V
EFAULT ALUE
Default value is 10 seconds.
E
XAMPLE
ALU(config-if Serial0/0:0)# mlfr hello-interval 15
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
Bundle Identification Name (BID) that is
associated with the bundle interface.
The bid name can be a maximum of 255
characters.
Description
Hello interval in seconds. The range of
this interval is from 1 to 180 seconds.
Beta
mlfr bid
299