Per Vlan Spanning Tree Cli Commands; No Spanning-Tree; No Spanning-Tree Vlan Cost; No Spanning-Tree Vlan Fwd-Time/Hello-Time/Max-Age/Priority - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Per VLAN Spanning Tree +
P VLAN S
ER PANNING
-
NO SPANNING TREE
no spanning-tree [vlan <1-4094>]
The "no" command disables the configured spanning-tree for a VLAN. By default,
spanning tree is disabled.
-
NO SPANNING TREE VLAN COST
no spanning-tree [vlan <1-4094>] cost <1-65535>
This command is entered in the Interface Configuration mode. The "no" command
resets the PVST+ cost to its default value. The default PVST+ cost is 4.
-
NO SPANNING TREE VLAN FWD
PRIORITY
no spanning-tree [vlan <1-4094>]{forward-time <4-30>|hello-time
<1-10>|max-age<6-40>|priority <0-65535>}
The "no" command resets the PVST+ Forward-time/Hello-time/Maximum-age/
Bridge priority to its default.
The default for each of the parameter is given below:
•
Forward time: 15 seconds
•
Hello-time: 2 seconds
•
Max-age: 20 seconds
•
Priority: 32768
Note: The following formula has to be satisfied when configuring the forward-time, hello-
time, and max-age:
((forward-time - 1) * 2) >= max-age &
& max-age >= ((hello-time + 1) * 2).
-
NO SPANNING TREE VLAN PORT
no spanning-tree [vlan <1-4094>] port-priority <0-255>
This command is entered in Interface Configuration mode. The "no" command
resets the PVST+ port-priority to its default value. The default PVST+ port-priority
is 128.
-
NO SPANNING TREE VLAN SPANNING
no spanning-tree [vlan <1-4094>] spanning-disabled
The "no" command enables the Spanning-tree on a specified interface.
174
Beta
T CLI C
REE OMMANDS
- /
TIME HELLO
-
PRIORITY
-
DISABLED
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
- / - /
TIME MAX AGE
Beta