No Attack Name Force; No Debug Firewall; No Default; No Firewall Policy {In|Out - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Release versions: 2.2; 2.2-r02; 2.3
Table of Contents

Advertisement

NO ATTACK NAME FORCE

no attack <name> force
This command is entered in the Configuration mode. This deletes a specified DoS
attack object from the global level.

NO DEBUG FIREWALL

no debug firewall {session|filter|nat|attack|alg|intrusion|
selector [saddr <ip-address>|daddr <ip-address>|protocol
<number>|sport <number>|dport <number>][output|permanent]|all
[detail-level]}
This command turns off the debugging functionality which is enabled using the
above command. The "selector" keyword allows you to turn off debugging only
for selected traffic.

NO DEFAULT

no default [stateless]
Enter this command in the Firewall-Attack Sub Configuration mode. The 'no'
command disables all the default attacks configured for an attack object. Stateless
keyword disables only the stateless default attacks.
NO FIREWALL POLICY
no firewall policy {in|out} <policy-name>
Enter this command in the Interface Configuration mode. This command detaches
a firewall policy attached to an interface. This command does not delete the
firewall policy definition in its entirety. It only detaches it from its interface. If the
command "no firewall policy name" is issued at the top level and if this firewall
policy is not bound to any interface, it deletes the firewall policy definition.

NO LOG

no log
This command is entered in the Firewall-Attack Sub Configuration mode. This 'no'
command disables logging of the attacks.

NO POLICY

no policy <name> force
Enter this command in the Firewall Configuration mode.The "force" keyword will
automatically detach the specified policy from respective interfaces, and deletes
the policy. This command can also be used to delete all the policy rules.

NO RULE

no rule <1-65535>
Enter this command in the Firewall Policy Sub Configuration mode. This deletes
only the rule in the firewall policy corresponding to the line number.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
{
|
}
IN
OUT
Alcatel-Lucent
no attack name force
615
Beta

Advertisement

Table of Contents
loading

Table of Contents