Clear Transparent-Forward Statistics; Transparent-Forward - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Transparent Firewall
CLEAR TRANSPARENT
clear transparent-forward statistics [<tf-policy name>]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command clears the statistics of all the TF policies configured in the system.
P
ARAMETERS
tf-policy name
E
XAMPLE
ALU(config)# clear transparent-forward statistics
-
TRANSPARENT FORWARD
transparent-forward [<tf-policy-name>] interface <interface-
name>
D
ESCRIPTION
Enter this command in the Interface Configuration mode.
This command is used to configure the TF feature on an interface (incoming
interface). You can optionally apply a TF policy (that defines the treatment of non-
IP and non-ARP packets) on the interface.
Note: 'IP Policy' command, if in effect, shall be cleaned up before this command takes
effect.
P
ARAMETERS
Parameter
tf-policy-name
interface-name
E
XAMPLE
The following configures TF feature and binds the TF policy 'TF1' on the interface
GigabitEthernet3/0 with outgoing interface as VLAN 10.
ALU(config)# interface GigabitEthernet3/0
ALU(config-if GigabitEthernet3/0)# transparent-forward TF1
interface Vlan 10
734
Beta
-
FORWARD STATISTICS
Parameter
Clears the statistics for the specified TF policy.
Name of the TF policy to be applied on the interface.
Use this keyword to configure the outgoing interface.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta