Clock Synchronize - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

CLOCK SYNCHRONIZE

clock synchronize [{using {ntp|rdate|rtc}] [server <name>]
[every <number> {hours|minutes}]
D
ESCRIPTION
This command establishes how the chassis should synchronize its time with an
external source.
P
ARAMETERS
ntp
rdate
rtc
name
number
hours
minutes
E
XAMPLE
ALU(config)# clock synchronize using ntp server 10.91.2.87
every 2 hours
This command has no output. To verify the settings, use the 'show clock'
command described in this section.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Network Time Protocol.
TCP/IP command. Retrieve the date and time
from a host or hosts on the network and
optionally set the local system time.
Real Time Compression protocol.
Name of the DNS (Domain Name Server).
The server name can be specified either in
dotted numeric or domain name format.
Depicts the number of minutes or hours
between the updates.
Time in hours.
Time in minutes.
clock synchronize
51
Beta