Show Interface - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multilink Frame Relay

SHOW INTERFACE

show interfaces mlfr [<1-256>]
D
ESCRIPTION
This command displays the configuration of the MLFR bundle interface specified.
P
ARAMETERS
1-256
E
XAMPLE
ALU(config)# show interfaces mlfr 1
mlfr1 is up, line protocol is up
Internet address is 192.168.1.1/24
Bundle id is mlfr1,
LMI enq sent 26219, LMI stat recvd 325, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent
LMI DLCI 0 LMI type is CCITT(q933a)
MTU 1500 bytes, BW 3072 Kbit, DLY 0 usec,
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation mlfr-bundle, loopback not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
614 packets input( 325 controld packets, 289 data packets),34295 bytes
26599 packets output( 26216 controld packets, 383 data packets),458430 bytes
53 packets dropped 0 giant packets
302
Beta
Parameter
keepalive set (10 sec)
0, LMI upd sent
frame relay DTE
Alcatel-Lucent
Description
Number that identifies the MLFR bundle.
0
OmniAccess 700 CLI Command Reference Guide
Beta