Ppp Ipcp Address Pool Local; Ppp Ipcp Negotiate - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Point to Point Protocol

PPP IPCP ADDRESS POOL LOCAL

ppp ipcp address pool local <ip-address>
D
ESCRIPTION
This command is used in the Interface Configuration Mode. This command
enables you to configure an IP address pool for IPCP to give an IP address to its
peer.
P
ARAMETERS
ip-address
D V
EFAULT ALUE
By default, no IP address pool is configured for IPCP.
E
XAMPLE
ALU(config-if Serial0/0:0)# ppp ipcp address pool local
10.10.10.10

PPP IPCP NEGOTIATE

ppp ipcp negotiate
D
ESCRIPTION
This command is used to initiate the IPCP negotiation on the interface.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, the OA-700 responds to IPCP negotiation initiated by the peer. Auto-
negotiation happens when the IP address is changed on the interface.
E
XAMPLE
ALU(config-if Serial1/0:0)# ppp ipcp negotiate
266
Beta
Parameter
Alcatel-Lucent
Description
IP address of remote DHCP server.
OmniAccess 700 CLI Command Reference Guide
Beta