Show Admission-Control Statistics Cac - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Call Admission Controller (CAC)
SHOW ADMISSION
show admission-control statistics cac [<interface-name>]
D
ESCRIPTION
This command displays the CAC statistics that includes total, used and free
bandwidth for all the interfaces.
It also displays total call count (call threshold), call count for active calls, priority
calls, and rejected calls for all interfaces. Details like bandwidth allocated per
priority class-map(s) and its usage is also displayed.
P
ARAMETERS
interface-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show admission-control statistics cac
Interface: GigabitEthernet7/0
Protocol SIP
Call-Threshold Statistics
Call Threshold = 10
Active Call Count = 0
Priority Call Count = 0
Rejected Call Count = 0
Bandwidth Statistics
Policy 2 Class 40
Total Bw = 10000000 bps Used Bw = 0 bps
Interface: GigabitEthernet7/1
Protocol SIP
Call-Threshold Statistics
Call Threshold = 10
Active Call Count = 0
Priority Call Count = 0
Rejected Call Count = 0
Bandwidth Statistics
Policy 2 Class 40
Total Bw = 1000000 bps Used Bw = 0 bps
R H
ELEASE ISTORY
Release 2.3: command was introduced.
752
Beta
-
CONTROL STATISTICS CAC
Parameter
Alcatel-Lucent
Description
Name of the interface. If the interface name
is specified, the CAC statistics is displayed
for the specified interface.
OmniAccess 700 CLI Command Reference Guide
Beta