Crc; Interface Serial - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

CRC

crc {16|32}
D
ESCRIPTION
This command is used to enable CRC.
P
ARAMETERS
16|32
D V
EFAULT ALUE
The default CRC value is 16.
E
XAMPLE
ALU(config-if Serial0/0)# crc 16

INTERFACE SERIAL

interface Serial <slot/port>
D
ESCRIPTION
Enters Serial Interface Configuration mode. This command is entered in the
Configuration mode to configure a serial interface in a specific slot/port of the
V.35/X.21/RS-232 card.
P
ARAMETERS
slot/port
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)#interface Serial0/0
ALU(config-if Serial0/0)#
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Parameter
Alcatel-Lucent
Description
These are the values you can set for the
crc.
Description
Slot and port numbers of the interface.
Beta
crc
237