Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual page 409

Left running head:
Chapter name (automatic)
Protocol Independent Features
E
XAMPLE
ALU# show route-map
route-map test, permit, sequence 1
Description:
Exit Policy:
Match clauses:
community (community-list filter) : 1
ip address (access-lists) : prefix-list testprefix
Set clauses:
route-map test, deny, sequence 2
Description:
Exit Policy:
Match clauses:
Set clauses:
ALU#
ALU# show route-map testset
route-map testset, permit, sequence 5
Description:
Exit Policy:
Match clauses:
ip address (access-lists) : 1
Set clauses:
metric 10
route-map testset, permit, sequence 10
Description:
Exit Policy:
Match clauses:
Set clauses:
metric 20
ALU#
Parameter
route-map
permit
sequence
Match clauses
tag
Set clauses
metric
Policy routing
matches
376
Beta
Name of the route map.
Indicates that if match condition is satisfied, then the route-
map result is permit.
Number that indicates the position a new route map is to
have in the list of route maps already configured with the
same name.
Match criteria - conditions which needs to be matched.
Set actions - particular actions to perform if the criteria
enforced by the match commands are met.
Displays the number of packets and bytes that have been
filtered by policy routing.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta