-
SOURCE
NAT PORT
[<1-65535>] match [{all|any}] <match-list name> source-nat
port-range <2048-65535> <2048-65535>
D
ESCRIPTION
Enter this command in the NAT configuration mode. This command is used to
configure SNAT with a port range.
P
ARAMETERS
Parameter
1-65535
match
[{all|any}]
<match-list
name>
source-nat
2048-65535
2048-65535
D
V
EFAULT
ALUE
If no port range is specified, a default port range of 2048 – 65535 is used.
E
XAMPLE
ALU(config-nat-N1)# match m1 source-nat port-range 2048 6000
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
RANGE
The range for the NAT policy rule. This rule number signifies
the priority of a rule.
This command forms a match-list of the Common
Classifiers that are pre-configured. In this type of match, the
relevant action is performed even if one rule in the list is
satisfied.
Type of NAT, here it is the SNAT.
The lower port number.
The upper port number.
Alcatel-Lucent
source-nat port-range
Description
Beta
575