Switchport Hybrid Native Vlan; Switchport Mode {Trunk|Hybrid - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Switching on L2 Ports

SWITCHPORT HYBRID NATIVE VLAN

switchport hybrid native vlan <2-4094>
D
ESCRIPTION
This command is used to configure Native VLAN for hybrid mode in the range 2-
4094.
P
ARAMETERS
2-4094
E
XAMPLE
ALU(config-if switchport0/0)# switchport hybrid native vlan 7
SWITCHPORT MODE

switchport mode {trunk|hybrid}

D
ESCRIPTION
This command is used to configure the L2 interface in the trunk or hybrid mode.
P
ARAMETERS
trunk
hybrid
E
XAMPLE
ALU(config-if switchport1/0)# switchport mode trunk
170
Beta
Parameter
{ |
TRUNK HYBRID
Parameter
Alcatel-Lucent
Description
The VLAN ID configured.
}
Description
Use this keyword to configure the L2 interface
in the Trunk mode.
Use this keyword to configure the L2 interface
in the Hybrid mode.
OmniAccess 700 CLI Command Reference Guide
Beta