Neighbor Local-As - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

D
EFAULT
No filter is used.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 filter-list 1 in
NEIGHBOR LOCAL
neighbor {<ip-address>|<peer-group-name>} local-as <1-65535>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command is used to
enable local-as feature for specified neighbor. AS number specified in the
command is used to form neighborship.
P
ARAMETERS
Parameter
ip-address
peer-group-name
1-65535
D
EFAULT
None.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 local-as 10
OmniAccess 700 CLI Command Reference Guide
Beta
-
AS
Neighbor's IP address.
Name of a BGP peer group.
Any valid AS number.
Note: Do not specify the AS number to which the
neighbor belongs.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description

neighbor local-as

425
Beta