Area Virtual-Link - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
AREA VIRTUAL LINK
area {<0-4294967295>|<ip-address>} virtual-link <router-id>
[authentication [message-digest|null] [[hello-
interval|retransmit-interval retransmit-interval|transmit-
delay|dead-interval] <1-8192>] authentication-key <0-0> <key>]|
message-digest-key <1-255> md5 <key>]]
D
ESCRIPTION
This command is used in the Router Configuration mode. This command
establishes a virtual link with neighbor specified by router ID.
P
ARAMETERS
Parameter
0-4294967295
ip-address
router-id
authentication
[message-
digest|null]
1-8192
authentication-
key <0-0> key
<1-255> md5 key
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-router ospf 30)# area 1 virtual-link
202.202.202.5
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Identifier for the OSPF stub area as a decimal value.
Identifier for the OSPF stub area as an IP address.
Router ID associated with virtual link neighbor. The router
ID appears in the 'show ip ospf' display. The router ID is
internally derived by each router from the interface IP
addresses. This value must be entered in the same format
as an IP address. There is no default.
Enable authentication over virtual link.
The dead interval.
The authentication key.
The message digest authentication key identifier.
Alcatel-Lucent
Description
Beta

area virtual-link

461