Show Ip Mroute - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SHOW IP MROUTE

show ip mroute [<group-address>] [<interface-name>]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays the multicast routing table.
P
ARAMETERS
Parameter
group-address
interface-name
E
XAMPLE
ALU# show ip mroute
IP Multicast Forwarding Information Base
Flags: T - SPT-bit set
(*, 224.1.1.1), uptime 0:10:21, flags:
Rates: Waiting for latest...
Incoming Interface: GigabitEthernet3/1, RPF failures 0
Outgoing Interfaces (1):
GigabitEthernet3/0
(4.4.4.4, 224.1.1.1), uptime 0:30:20, expired, flags:
Rates: Waiting for latest...
Incoming Interface: Serial0/0:0, RPF failures 0
Outgoing Interfaces (1):
GigabitEthernet3/0
(*, 225.5.5.5), uptime 0:09:37, flags:
Rates: Waiting for latest...
Incoming Interface: GigabitEthernet3/1, RPF failures 0
Outgoing Interfaces (0):
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Displays the routing table entry for the given multicast group
address.
Displays the multicast routes for which specified interface is
outgoing interface.
Alcatel-Lucent
Description
Beta
show ip mroute
533