Spanning-Tree Vlan - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
SPANNING TREE VLAN
spanning-tree [vlan <1-4094>]
D
ESCRIPTION
This command is entered in the Configuration mode. This command enables a
spanning-tree for VLAN.
P
ARAMETERS
Command (in CM)
1-4094
D V
EFAULT ALUE
By default, spanning tree is disabled.
E
XAMPLE
The following command enables the spanning tree for the default VLAN-ID, i.e.,
VLAN-1.
ALU(config)# spanning-tree
Note: In the above example, the VLAN-ID takes a default value of 1.
The following example configures spanning tree for vlan 100.
ALU(config)# spanning-tree vlan 100
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Vlan ID configured.
Alcatel-Lucent

spanning-tree vlan

Description
Beta
179