Firewall Policy {In | Out - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

FIREWALL POLICY
firewall policy {in|out} <policy-name>
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command is used
to attach a firewall policy (to which an intrusion sensor is attached) to an interface
in 'in' or 'out' direction.
P
ARAMETERS
Parameter
in
out
policy name
Note: Firewall policy will take effect once it is attached to an interface.
E
XAMPLE
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)# firewall policy in P1
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
{ | }
IN OUT
Firewall policy is applied to the ingress (incoming) traffic if
"in" keyword is used.
Firewall policy is applied to the egress (outgoing) traffic if
"out" keyword is used.
Name of the firewall policy.
Alcatel-Lucent

firewall policy {in | out}

Description
Beta
711