Set Local-Preference Number Value - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Parameter
1-20000
1-255
D V
EFAULT ALUE
By default, set dampening is disabled.
E
XAMPLE
ALU(config-route-map)# set dampening 10 2000 2000 15
-
SET LOCAL PREFERENCE NUMBER VALUE
set local-preference <0-4294967295>
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This command
assigns a local preference to the BGP path.
P
ARAMETERS
Parameter
0-4294967295
D V
EFAULT ALUE
By default, local preference value is 100.
E
XAMPLE
ALU(config-route-map)# set local-preference 100
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
A route becomes invalid when penalty exceeds the
configured suppress limit.
The default is 2000 seconds.
Maximum time (in minutes) a route can be suppressed. The
default is four times the half-time
Preference value.
Alcatel-Lucent

set local-preference number value

Description
value.
Description
Beta
365