-
ROUTER
ID
router-id <ip-address>
D
ESCRIPTION
Enter this command in Router Configuration mode. This command configures
OSPF router ID.
P
ARAMETERS
Parameter
ip-address
D
V
EFAULT
ALUE
Default Router ID is generated using interface IP addresses.
E
XAMPLE
ALU(config-router ospf 30)#router-id 35.0.0.1
ROUTER OSPF
router ospf <1-65535>
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure an OSPF routing process.
P
ARAMETERS
Parameter
1-65535
D
V
EFAULT
ALUE
No OSPF routing process is defined.
E
XAMPLE
ALU(config)# router ospf 30
ALU(config-router ospf 30)#
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Router ID in IP address format.
Internally used identification parameter for an OSPF routing
process. It is locally assigned and can be any positive
integer. A unique value is assigned for each OSPF routing
process.
Alcatel-Lucent
Description
Description
Beta
router-id
479