Default Information Originate (Rip); Default-Metric - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

DEFAULT INFORMATION ORIGINATE
default-information originate
D
ESCRIPTION
Enter the command in the Router Configuration mode. This command is used to
generate default route into RIP.
P
ARAMETERS
None.
D V
EFAULT ALUE
Disabled.
E
XAMPLE
ALU(config-router rip)# default-information originate
-
DEFAULT METRIC
default-metric <1-16>
D
ESCRIPTION
A default metric helps to solve the problem of redistributing routes with
incompatible metrics. Whenever metrics do not convert, a default metric provides
a reasonable substitute and enables the redistribution to proceed.
Enter the command in Router Configuration mode. This command sets the default
metric values of redistributed routes.
P
ARAMETERS
Parameter
1-16
D V
EFAULT ALUE
The metric of redistributed connected and static routes is set to 0, otherwise
default metric is set to 1.
E
XAMPLE
ALU(config-router rip)# default metric 10
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
( )
RIP
Specify the default metric value.
Alcatel-Lucent

default information originate (rip)

Description
Beta
379