Neighbor Unsupress-Map - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
D V
EFAULT ALUE
Keepalive time: 60 seconds.
Holdtime: 180 seconds.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 timers 50 500
NEIGHBOR UNSUPRESS
neighbor {<ip-address>|<peer-group-name>} unsupress-map <route-
map-name>
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command enables BGP routers to selectively advertise routes previously
suppressed by the 'aggregate-address' command.
P
ARAMETERS
Parameter
ip-address
peer-group-name
route-map-name
D V
EFAULT ALUE
If aggregate-address command is configured, only then the aggregate routes are
advertised.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 unsupress-map r1
434
Beta
-
MAP
IP address of the BGP-speaking neighbor.
Name of a BGP peer group.
Name of the route map.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta