Ppp Ipcp Address Accept-Local; Ppp Ipcp Address Accept-Peer - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

PPP IPCP ADDRESS ACCEPT

ppp ipcp address accept-local

D
ESCRIPTION
This command is used in the Interface Configuration mode. This command sets a
flag to accept a local IP address given to it by the peer during IPCP.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, the flag is set to reject the local IP address from the peer during IPCP.
E
XAMPLE
ALU(config-if Serial0/0:0)# ppp ipcp address accept-local
PPP IPCP ADDRESS ACCEPT

ppp ipcp address accept-peer

D
ESCRIPTION
This command is used in the Interface Configuration mode. This command sets
the flag to accept the peer's IP address during IPCP.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, the flag is set to accept the peer's IP address during IPCP.
E
XAMPLE
ALU(config-if Serial0/0:0)# ppp ipcp address accept-peer
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
LOCAL
-
PEER
Alcatel-Lucent
ppp ipcp address accept-local
265
Beta