Table of Contents
Advertisement
-
NO DISTRIBUTE
no distribute-list {<1- 99>|<1300-2699>|gateway <ip-prefix-list
name>|prefix <ip-prefix-list name>} {in|out} [<interface-name>]
This command disables the functionality to filter networks in routing updates.
NO IP RIP AUTHENTICATION KEY
no ip rip authentication key-chain <key-chain name>
The 'no' command removes the key chain associated to an interface. This
disables RIP authentication.
NO IP RIP AUTHENTICATION MODE
no ip rip authentication mode
The 'no' command sets the authentication mode to its default, i.e, plain Text
authentication.
-
NO IP SPLIT
HORIZON
no ip split-horizon
This command disables the split horizon mechanism.
NO NEIGHBOR
no neighbor <neighbor-address>
This command removes the statically configured neighbors.
NO NETWORK
no network <network-number>
The above command disables the configured network. RIP stops sending updates
through interfaces on this network. Also these interfaces will not be advertised in
any RIP updates.
-
NO OFFSET
LIST
no offset-list {{<0-99>|<1300-1999> <access-list name>}
{in|out}} {<0-16>} [<interface-name>]
The above command disables the configured offset-list.
-
NO PASSIVE
INTERFACE
no passive-interface {<interface-name>|default}
The above command disables the configured passive interfaces.
OmniAccess 700 CLI Command Reference Guide
Beta
LIST
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
CHAIN
no distribute-list
387
Beta
Advertisement
Table of Contents
