Mlfr Lid; Mlfr Retry Count - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multilink Frame Relay

MLFR LID

mlfr lid <name>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
assigns a link identification (LID) name to the interface that is part of the bundle.
P
ARAMETERS
name
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if Serial0/0:0)# mlfr lid alu-wan-link

MLFR RETRY COUNT

mlfr retry-count <1-5>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command
configures the retry count to the number specified.
P
ARAMETERS
1-5
D V
EFAULT ALUE
The default value of retry count is 2.
E
XAMPLE
ALU(config-if Serial0/0:0)# mlfr retry-count 3
300
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Link identification (LID) name that is
associated with the interface.
Description
Number that specifies the retry count.
The range for retry count varies from 1 to
5.
OmniAccess 700 CLI Command Reference Guide
Beta